Matrix Telecom SIMADO GBR42 System Manual page 97

Table of Contents

Advertisement

Step 1
Port Enable/Disable-This command is used to disable a Mobile Port.
Disabling Mobile Port is required in cases like Budget exhausted
(Prepaid SIM card), Network problems, SIM problems, Hardware
failure, etc. On disabling the port, No calls are possible through this
port.
Use following command to enable/disable a mobile port:
301-Mobile Port-Code-#*
Where,
Mobile Port is from 1 to 4.
Code Meaning
0
Disable
1
Enable
By default, all the ports are enabled.
Step 2
Receive Gain-This command is used to increase/decrease the
receive Gain to improve the audibility of the incoming speech.
Use following command to program the receive gain of a mobile port:
302-Mobile Port-Receive Gain-#*
Where,
Mobile Port is from 1 to 4.
Receive Gain Meaning
1
2
3
4
5
By default, Receive Gain is 3 for all ports.
Step 3
Transmit Gain-This command is used to increase/decrease the
Transmit Gain to improve the output RF signal from the Gateway.
Use following command to program the transmit gain of a mobile port:
303-Mobile Port-Transmit Gain-#*
Where,
Mobile Port is from 1 to 4.
SIMADO GBR42 V1 System Manual
Very Low
Low
Normal
High
Very high
Matrix
97

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SIMADO GBR42 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents