Matrix Telecom SIMADO GBR42 System Manual page 74

Matrix
How to program?
Step 1: To program the prefix string in the dialed number string table
using command 151.
Step 2: To program the routing group in the dialed number string table
using command 152.
Step 3: To program the "Change Called Number?" flag at an index
into the dialed number based routing table using command
153.
Step 4: To program new called number at an index in the dialed
number table using command 154.
Step 5: To clear the entire dialed number string table using command
155.
Step 1
Use following command to program the prefix string in the dialed
number string table:
151-Dialed Number String Table Index-Number String-#*
Where,
Dialed Number String Table Index is from 002-500. Number String at
001 is not programmable as it is reserved for the case if no match is
found with the dialed number routing table.
Number String is of maximum 8 digits (0-9, #, *).
By default, Number String is Blank.
Use following command to clear number string in the dialed number
string table:
151-Dialed Number String Table Index-#*
74 SIMADO GBR42 V1 System Manual