Matrix Telecom SIMADO GBR42 System Manual page 105

'Y' (MCC 404, MNC 25) is cheaper, but the third operator 'Z' (MCC
404, MNC 21) is little cheap for call charges. Then program the
network operator as per priority, as shown below:
He should program the SIMADO GBR42, for manual mode which
doesn't depend on field strength of the network. He makes the call
from mobile port 3.
721-3-2-#*
722-3-1-40498-#*
722-3-2-40425-#*
722-3-3-40421-#*
Rest of priority are kept, blank.
Important Points:
• In manual mode, network is not selected as per the field strength
but is selected as per the priority network codes, programmed for
that mobile port.
• Display of GSM Operator's ID:
The gateway makes Query for the network operator's ID
irrespective of the registration process is Manual or automatic for
the Mobile port. This can be through Jeeves of the GBR42. The
register ports will display their corresponding operator's code and
unregistered ports will display 'Not Registered'.
Relevant Topic:
1. Mobile Port Parameters
SIMADO GBR42 V1 System Manual
(Network selection mode: Manual)
(1st priority to network 'X')
(2nd priority to network 'Y')
(3rd priority to network 'Z')
96
=X=X=
Matrix
105