Matrix Telecom SIMADO GBR42 System Manual page 122

Matrix
602-Mobile Port-Code-#*
Where,
Mobile Port is from 1 to 4.
Code Meaning
0 Disable
1 Enable
By default, RCOC for No Response destination on Mobile is
Disabled.
Step 3
Use following command to enable/disable RCOC for speech
destination on mobile port:
603-Mobile Port-Code-#*
Where,
Mobile Port is from 1 to 4.
Code Meaning
0 Disable
1 Enable
By default, RCOC for Speech destination on Mobile is Disabled.
Step 4
Record Delete Timer: This timer signifies the time after which the call
is deleted from the table.
Use following command to program to record delete timer:
610-Record Delete Timer-#*
Where,
Record delete timer is from 001 to 999 minutes.
By default, Record delete timer is 999 minutes.
Step 5
Use following command to clear RCOC table:
611-#*
Example:
If a user wants to contact a person urgently. But his mobile number is
busy. The number is dialed from mobile port 3 of the gateway. The
user wants to retain all previous RCOC data only for next 12 hours.
Then he should program the feature using following commands:
122 SIMADO GBR42 V1 System Manual