Console Port Connector Pinout Information - Juniper EX4100 Hardware Manual

Table 32: Specifications of Cables to Connect to Management Devices
Ports
Management Ethernet
port
Mini-USB Type-B Console
port

Console Port Connector Pinout Information

The console port on a Juniper Networks device is an RS-232 serial interface that uses an RJ-45
connector to connect to a console management device. The default baud rate for the console port is
9600 baud.
Table 33 on page 110 provides the pinout information for the RJ-45 console connector.
NOTE: If your laptop or desktop PC does not have a DB-9 plug connector pin and you want to
connect your laptop or desktop PC directly to a device, use a combination of the RJ-45-to-DB-9
socket adapter and a USB-to-DB-9 plug adapter. You must provide the USB-to-DB-9 plug
adapter.
Table 33: Console Port Connector Pinout Information
Pin Signal
1 RTS Output
2 DTR Output
3 TxD Output
Cable Specifications
Ethernet cable with an
RJ-45 connector
Mini-USB cable with
standard-A and Mini-USB
Type-B (5-pin) connector
(Continued)
Receptacle
RJ-45
Mini-USB
Description
Request to send
Data terminal ready
Transmit data
Additional Information
Connect a Device to a
Network for Out-of-Band
Management
110