Figure 7 on page 6
shows the components on the front panel of the EX4100-24P switch.
Figure 7: Components on the Front Panel of the EX4100-24P Switch
Front mounting brackets
1
—
2
10/100/1000BASE-T RJ-45 network ports.
—
These ports in EX4100-24P switches support
PoE+ (30 W by default).
3
Chassis status LEDs (labeled SYS, ALM, MST,
—
and CLD)
Port mode LEDs (labeled SPD, DX, EN, and
4
—
PoE)
5
Factory Reset/Mode button
—
NOTE: Claim Code labels for 24 port EX4100 models are on the front panels; for 48 port
EX4100 models, Claim Code labels are on the rear panels.
Figure 8 on page 6
shows the components on the front panel of an EX4100-24T switch.
Figure 8: Components on the Front Panel of the EX4100-24T Switch
Front mounting brackets
1
—
RS232 to USB Type-C console port
6
—
7
1GE/10GE SFP+ Uplink ports
—
8
10GE/25GE SFP28 Virtual Chassis ports
—
Reset button
9
—
10
Claim Code label
—
RS232 to USB Type-C console port
6
—
6