Juniper EX4100 Hardware Manual page 61

Table 10: Port Status of Network Ports Based on States of Port Mode LEDs
LED
DX
EN
POE
Color
Amber
Blue
Green
Green
Green
State and Description
•
On steadily - 2.5 Gbps (supported only on
EX4100-24MP and EX4100-48MP)
•
Blinking - 5 Gbps (supported only on EX4100-24MP)
•
On steadily - 10 Gbps (supported only on
EX4100-24MP)
Indicates the duplex mode. The status indicators are as
follows:
•
On steadily—The port is set to full-duplex mode.
•
Unlit—The port is set to half-duplex mode.
Indicates the administrative status. The status indicators
are as follows:
•
On steadily—The port is administratively enabled.
•
Unlit—The port is administratively disabled.
Indicates the PoE mode. The status indicators are as
follows:
•
On steadily—PoE is enabled on the port, and a device
is drawing power.
•
Blinking—PoE is enabled on the port, but nothing is
drawing power from the port.
•
Unlit—PoE is not enabled on the port.
(Continued)
52