Table of Contents
Advertisement
6.
Have one person grasp both sides of the switch, lift the switch, and position it in the rack, aligning
the holes on the side mounting rail with the threaded holes in the front post of the rack. Have the
person align the bottom hole in both the front-mounting brackets with a hole in each rack rail,
making sure that the chassis is level. See
Figure 73: Mounting the Switch to the Front Posts in a Rack
7.
Have a second person secure the front of the switch to the rack by using the appropriate screws for
your rack.
8.
Slide the rear-mounting blades into the side mounting-rails. See
Figure 74: Sliding the Rear-Mounting Blades into the Side Mounting Rails
Figure 73 on page
129.
Figure 74 on page
129
129.
Hide quick links:
Advertisement
Table of Contents
