Juniper EX4100 Hardware Manual page 147

2. Place the grounding lug attached to the grounding cable over the protective earthing terminal on the
rear panel (see Figure 84 on page 138
Figure 84: Connect a Grounding Cable to an EX4100-24P, EX4100-24T, EX4100-48P, EX4100-48T,
EX4100-24MP, and EX4100-48MP Switch
Figure 85: Connect a Grounding Cable to an EX4100-F-24P, EX4100-F-24T, EX4100-F-48P, and
EX4100-F-48T Switch
3. Secure the grounding lug to the protective earthing terminal with the screws.
4. Secure the grounding cable and ensure that it does not touch or block access to other switch
components.
WARNING: Ensure that the cable does not drape where people could trip over it.
and Figure 85 on page 138).
138