Juniper EX4100 Hardware Manual page 20

Figure 7 on page 6 shows the components on the front panel of the EX4100-24MP switch.
Figure 17: Components on the Front Panel of the EX4100-24MP Switch
Front mounting brackets
1
—
2 Eight 1/2.5/5/10 GE and sixteen 1 GE BASE-
—
T RJ-45 network ports. These ports in
EX4100-24MP support PoE++ (90 W).
3 Chassis status LEDs (labeled SYS, ALM, MST,
—
and CLD)
Port mode LEDs (labeled SPD, DX, EN and
4
—
PoE)
5 Factory Reset/Mode button
—
NOTE: Claim Code labels for 24 port EX4100 models are on the front panels; for 48 port
EX4100 models, Claim Code labels are on the rear panels.
Figure 29 on page 15 shows the components on the front panel of EX4100-48MP switch.
Figure 18: Components on the Front Panel of the EX4100-48MP Switch
1 Front mounting brackets
—
RS232 to USB Type-C console port
6
—
7 1/10 GE SFP+ Uplink ports
—
8 10/25 GE SFP28 Virtual Chassis ports
—
Reset button
9
—
10 Claim Code label
—
6 RS232 to USB Type-C console port
—
11