Juniper EX4100 Hardware Manual page 24

Figure 28 on page 15 shows the components on the front panel of the EX4100-F-24P switch.
Figure 28: Components on the Front Panel of the EX4100-F-24P Switch
Front mounting brackets
1
—
2 10/100/1000BASE-T RJ-45 network ports.
—
These ports in EX4100-F-24P support PoE+
(30 W by default).
3 Chassis status LEDs (labeled SYS, ALM, MST,
—
and CLD)
Port mode LEDs (labeled SPD, DX, EN and
4
—
PoE)
5 Factory Reset/Mode button
—
NOTE: Claim Code labels for 24 port EX4100-F models are on the front panels; for 48 port
EX4100-F models, Claim Code labels are on the rear panels.
Figure 29 on page 15 shows the components on the front panel of EX4100-F-24T switch.
Figure 29: Components on the Front Panel of the EX4100-F-24T Switch
1 Front mounting brackets
—
RS232 to USB Type-C console port
6
—
7 10 GE SFP+ Uplink ports
—
8 1/10 GE SFP+ Virtual Chassis ports
—
Reset button
9
—
10 Claim Code label
—
6 RS232 to USB Type-C console port
—
15