Table of Contents
Advertisement
3.
Attach the front-mounting brackets (either the flush or the 2-in.-recess front-mounting brackets) to
the side mounting-rails by using the 6 4-40 flat-head Phillips mounting screws. See
page
128.
Figure 71: Attaching the Front-Mounting Bracket to the Side Mounting-Rail
Side mounting rail
1
—
4.
Align the side mounting rails along the side panels of the switch chassis. Align the two holes in the
rear of the side mounting rails with the two holes on the rear of the side panel.
5.
As shown in
Figure 72 on page
chassis and insert and tighten the twelve 4x6 mm Phillips flat-head mounting screws to secure the
side panels to the two sides of the switch chassis.
Figure 72: Attaching the Side Mounting Rail to the Switch Chassis
2
—
128, align the side mounting rails along the side panels of the switch
Front-mounting bracket
128
Figure 71 on
Hide quick links:
Advertisement
Table of Contents
