ProSoft Technology ControlLogix inRAx MVI56E-MNETR User Manual page 95

MVI56E-MNETR ♦ ControlLogix Platform
Modbus TCP/IP Interface Module with Reduced Data Block
In the Connection Setup dialog box, click the T
2
verify if the module is accessible with the current settings.
You can also use CIPconnect
ENBT card.
Refer to Using CIPconnect to Connect to the Module (page 71, page 24) for
information on how to construct a CIP path.
ProSoft Technology, Inc.
June 14, 2011
EST
®
to connect to the module through a 1756-
Diagnostics and Troubleshooting
button to
C
ONNECTION
Page 95 of 175
User Manual