Monitoring Mnet Client Information; Command List; Command Status; Config - ProSoft Technology ControlLogix inRAx MVI56E-MNETR User Manual

Diagnostics and Troubleshooting
User Manual
4.6

Monitoring MNET Client Information

Use the MNET CLIENT menu to view the configuration and status information for
the MNET Client(s).

4.6.1 Command List

Use the Command List menu to view the command list settings for MNET Client
x. The information on this menu corresponds with the settings in the MNET Client
x Commands settings in ProSoft Configuration Builder.
Use the scroll bar on the right edge of the window to view each MNET Client
command.

4.6.2 Command Status

Use the Command Status menu to view MNET Client x Command status.
A zero indicates no error.
A non-zero value indicates an error. Refer to Client Command Errors (page 128)
for an explanation of each value.

4.6.3 Config

Use the Configuration menu to view configuration settings for MNET Client x.
The information on this menu corresponds with the configuration information in
the MNET Client x settings in ProSoft Configuration Builder.

4.6.4 Status

Use the Status menu to view status for MNET Client x. During normal operation,
the number of requests and responses should increment, while the number of
errors should not change.
Page 100 of 175
MVI56E-MNETR ♦ ControlLogix Platform
Modbus TCP/IP Interface Module with Reduced Data Block
ProSoft Technology, Inc.
June 14, 2011