Reading The Clock Value From The Module - ProSoft Technology ControlLogix inRAx MVI56E-MNETR User Manual

MVI56E-MNETR ♦ ControlLogix Platform
Modbus TCP/IP Interface Module with Reduced Data Block

5.6.6 Reading the Clock Value from the Module

Expand the MVI56MNETRC
MVI56MNETRC
The bit will be automatically reset and the current clock value will be copied to
MVI56MNETRC
To check the status of the message, refer to the R
ProSoft Technology, Inc.
June 14, 2011
controller tag and move a value of 1 to
LOCK
.R
LOCK EAD
controller tag as follows.
.C
LOCK ONFIG
MSG tag.
C
EAD LOCK
Reference
User Manual
Page 153 of 175