ProSoft Technology ControlLogix inRAx MVI56E-MNETR User Manual page 60

Configuring the MVI56E-MNETR Module
User Manual
Command Entry Formats
The following table shows the structure of the configuration data necessary for
each of the supported commands.
1 2
Enable Internal
Code Address
Code Register
(bit)
Code Register
(bit)
Code Register 1/10th Seconds Word
Code Register 1/10th Seconds Word
Code 1 bit
Code 1 bit
Code Register
(bit)
Code Register 1/10th Seconds Word
The first part of the record is the module information, which relates to the MVI56E
module and the second part contains information required to interface to the
server device.
Command list example:
Page 60 of 175
3 4 5
Poll Interval Count Swap
Time Code
1/10th Seconds Bit 0
Count
1/10th Seconds Bit 0
Count
Code
Count
0
Count
1/10th Seconds Bit 0
Count
1/10th Seconds Word 0
Count
1/10th Seconds Bit 0
Count
0
Count
MVI56E-MNETR ♦ ControlLogix Platform
Modbus TCP/IP Interface Module with Reduced Data Block
6 7 8
IP Address Serv Slave
Port Node
IP Address Port # Address Read Coil (0x)
IP Address Port # Address Read Input (1x)
IP Address Port # Address Read Holding
IP Address Port # Address Read Input Registers
IP Address Port # Address Force (Write) Single
IP Address Port # Address Preset (Write) Single
IP Address Port # Address Force (Write)
IP Address Port # Address Preset (Write)
9 10
Function Code Device Modbus
Address
Register
Register
Register
Registers (4x)
Register
(3x)
Register
Coil (0x)
Register
Register (4x)
Register
Multiple Coil (0x)
Register
Multiple Register (4x)
ProSoft Technology, Inc.
June 14, 2011