netAlly EtherScope nXG Controlled Edition User Manual page 81

General Settings and Tools
From this screen, you can also choose or enter
a custom Dwell Time, meaning the amount of
time the EtherScope lingers on each channel
gathering data. Tap the Dwell Time field to
adjust this setting.
Combine Utilization: Enable this setting to
combine 802.11 and non-802.11 channel
utilization into one total utilization
measurement. In environments with 802.11ax
traffic, turn this setting on to accurately
measure channel utilization. When this setting
is enabled, EtherScope app screens that
typically show both 802.11 and non-802.11
utilization (such as the Wi-Fi Channels
Map) now show the total utilization.
User-Defined MAC: This setting affects the
Wi-Fi
Test Port only. Tap the toggle switch to enable
a user-defined MAC address. When enabled, an
additional User-Defined MAC field appears
under the toggle setting. Touch the lower field
to enter your desired MAC address for the
EtherScope. When a User-Defined MAC is
enabled, (User-defined) appears next to the
MAC address on the About screen and on
relevant test result screens.
81