1. Copy the .zip file to a Micro SD card
inserted into your EtherScope.
2. Power off your EtherScope unit.
3. Press and hold the volume up button and
press the power button to start up the
EtherScope in Recovery Mode. Continue
holding the volume up button until the
Recovery screen appears.
4. In Recovery Mode, use the volume buttons
to highlight "apply update from SD card,"
and press the power button to confirm the
selection.
5. Use the volume buttons to highlight the
correct update file on the Micro SD card,
and press the power button to confirm.
The EtherScope opens the Updater, installs the
System update, and then restarts with the
update installed.
After updating Android, be sure to check the
available Applications update version to
determine if an Applications update is still
required.
Software Management
116
Need help?
Do you have a question about the EtherScope nXG Controlled Edition and is the answer not in the manual?