netAlly EtherScope nXG Controlled Edition User Manual page 688

2. With the unit powered on, touch the
TOOLS
3. In the TOOLS menu, select Testing Tools >
Performance Peer.
4. Select the appropriate UDP Port number if
other than the default of 3842.
NOTE: The port number set on your
endpoint must match the port number
used by your source EtherScope.
5. Turn on Enable AutoStart to cause the Per-
formance Peer function to start auto-
matically when the OneTouch is powered
on.
6. Tap the START button.
The PERFORMANCE PEER screen appears,
and a network link is automatically
established.
7. The IPv4 address of the peer is displayed on
the screen. Enter this address on the
Endpoint Device
nXG Controlled Edition's Performance test
Services settings.
icon on the Home screen.
screen in the EtherScope
688
Performance Test App