netAlly EtherScope nXG Controlled Edition User Manual page 288

AutoTest App and Profiles
Wi-Fi Band
Tap this setting to specify the wireless band(s)
on which the Wi-Fi Profile attempts to connect.
The default setting of Auto allows the unit to
connect on either band. Note that the Profile
fails to link if this setting conflicts with the
selected bands in General Settings.
Roam Threshold
This threshold controls the Signal Strength (in
dBm) at which EtherScope stays connected and
looks for another AP on the network with a
stronger signal. If found, it disconnects from
the current AP and connect to the AP with a
stronger signal. Touch the field to select a new
value or enter a custom one.
Link Test Thresholds
Open the Link Test Thresholds screen to adjust
the values that determine
Success/Warning/Fail
results for the following
measurements.
288