netAlly EtherScope nXG Controlled Edition User Manual page 391

Capture App
Slice Size: Touch this field to select a specific
frame slice size or enter a custom value. The
Slice Size setting limits how much of each
packet is captured. A smaller slice size is useful
when you are interested in the packet's header
but do not need to see all the payload data.
The default is Full Packet.
Capture Port: Touch to select either the Wired
or Wi-Fi test port.
Wired Filters
All filters are disabled by default unless you
open Capture from another app. Touch the
fields below to enable and enter filter values.
MAC: Enter the MAC address of a host to
capture only packets that contain the host's
MAC address as the source or destination.
IP: Enter the IP address of a host to capture
only traffic to and from the host. You can
specify an IPv4 or IPv6 address.
VLAN: Enter a VLAN number to capture only
traffic tagged for that VLAN.
391