netAlly EtherScope nXG Controlled Edition User Manual page 699

Performance Test App
Address: IP address of the endpoint
Endpoint Type: Peer or Reflector
Status: Current status of the test, including any
error messages
Throughput, Loss, Latency, and Jitter
Graphs
The graphs described in this section update
every 5 or 30 seconds for as long as the test is
running. The graphs save and display data for
the entire test duration, with a max duration of
24 hours.
Peer endpoints display separate Up and Down
graphs (as shown below) for Throughput,
Frames Lost, Latency, and Jitter, while
Reflector endpoints display one round trip
measurement for each.
699