5. Go to the other three corners of the area,
and note the signal strength at each corner.
6. Go to the section with the strongest signal.
7. Repeat steps 3 through 6 until you find the
device.
If you still cannot find the device, try looking
on the floors above or below you. If you cannot
find a client, try locating the AP to which the
client is connected first.
Using the Optional External Antenna
In large, open areas, the external antenna can
help determine the direction of a signal source
more precisely than the internal antenna. Visit
NetAlly.com
To get the best measurements with the external
antenna, hold it at a constant height, above
any cubicle walls, and point the front of the
antenna towards your search area, as shown
below.
for purchasing information.
545
Wi-Fi Analysis App
Need help?
Do you have a question about the EtherScope nXG Controlled Edition and is the answer not in the manual?
Questions and answers