netAlly EtherScope nXG Controlled Edition User Manual page 276

AutoTest App and Profiles
created a "Connect to [SSID]" profile from the
Wi-Fi app, the Authentication type is auto-
matically selected. If needed, touch to open the
Authentication dialog and select the correct
security type for the network.
The following settings depend on the Authentic-
ation type. Enter all necessary credentials for
the network security type, such as Encryption,
Keys, EAP type, username, certificate, and/or
password.
WEP Key
This setting appears if the Authentication type
is WEP Shared or WEP Auto. Tap to select the
correct key type (ASCII or Hex) and enter the
key.
Encryption
Touch to select an encryption type if needed.
The default is "Auto."
276