netAlly EtherScope nXG Controlled Edition User Manual page 122

2. Navigate to the Units
Live.com.
3. Select the EtherScope you want to remote
control from the list of claimed units.
4. Click or touch the REMOTE icon
top right of the page to open an embedded
window containing the EtherScope
interface.
5. If necessary, at the top of the window,
enter the Password set in
> Management > VNC on the EtherScope
unit.
To use the Link-Live website while your remote
session is active, you must open a new Link-Live
tab or window.
Back to Title and Contents
Software Management
page at Link-
General Settings
122
at the