Configuring Lanbert Loopback Settings - netAlly EtherScope nXG Controlled Edition User Manual

Tap the pencil icon
l
screen to enter a Custom Value for the loss
threshold.
Configuring LANBERT Loopback
Settings
To configure this EtherScope as an active
loopback device, select the LANBERT icon
from the Home screen, then touch the Menu
icon
you finish configuring, tap the back button
to return to the LANBERT test screen.
The only available setting is Speed.
Match the speed to the speed you selected
l
for the transmitting test device. You can
choose 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps,
or 10 Gbps. (All settings are full duplex.)
Auto lets the EtherScope automatically
l
negotiate the speed.
Back to Title and Contents
and select Loopback Settings. When
to open an editing
736
LANBERT™ Test App