Running An Iperf Test - netAlly EtherScope nXG Controlled Edition User Manual

iPerf Test App

Running an iPerf Test

Ensure that you have an active link on the
Interface (Test or Management Port) from
which you are running the iPerf test. Wired
and Wi-Fi test ports require that an AutoTest
Wired or Wi-Fi Profile has run to establish link.
The AutoTest Wired Profile runs automatically,
but you must open the AutoTest app to run a
Wi-Fi Profile and link on the Wi-Fi test port.
Management ports link automatically if a
connection is available.
Tap the START button on the main iPerf screen
to begin testing.
724