netAlly EtherScope nXG Controlled Edition User Manual page 721

iPerf Test App
Touch each field to enter or revise selections as
needed. Changed settings are automatically
applied. When you finish configuring, tap the
back button to return to the iPerf test
screen.
Interface: This setting determines the
EtherScope port from which the test runs.
Touch the field to select Any Port, Wired or Wi-
Fi Test Port, or Wired or Wi-Fi Management
Port. See Test and Management Ports for
explanations of the different ports.
IPv4 Address: Touch the field to enter or select
the IPv4 address of the target iPerf server. Only
IPv4 addresses are allowed for iPerf testing.
721