Huawei NetEngine80E Installation Manual page 83

HUAWEI NetEngine80E Router
Installation Guide
4.1 Installing the NE80E in a Cabinet
1.Unpacking the Device
l Move the wooden cases into the equipment room or near the equipment room (if space permits) before
l Wear gloves during unpacking cases to protect your hands.
1.Adjusting the height of the slide rail
1U=44.5mm
The height of three holes on the mounting rails is 1U
2.Positioning captive nuts using rack-mounting ear
Issue 02 (2011-09-10)
NOTE
unpacking. In this way, you can avoid damage to the router during the transportation after unpacking.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Installing NE80E
75