Huawei NetEngine80E Installation Manual page 61

HUAWEI NetEngine80E Router
Installation Guide
Step 4 To remove an Ethernet connector, press the locking key and pull out the connector, as shown in
Figure
Figure 3-60 Removing an Ethernet connector
----End
3.4.4 Installing Fiber Connectors
This section describes how to install various types of fiber connections and how to clean fiber
connectors and MT connectors with guide pins.
Context
l After you remove the dustproof cap, ensure that the fiber pins are clean and install them as
l When you disassemble fiber connectors, you must use a dedicated tool if the connectors are
Instructions on How to Use an Optical Module
Use only the modules supplied by HUAWEI.
Precautions for the loosened optical module
l
Issue 02 (2011-09-10)
3-60.
CAUTION
soon as possible.
densely installed.
NOTE
When installing an optical module, force it into position. If a crack sound is heard or a slight
tremor is felt, it indicates that the latch boss is secured. When the latch boss is not secured,
the connecting finger is unstably connected to the connector on the board, and the link may
become Up. On the condition that the optical module tremors or collides with another
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 On-site Cable Assembly and Installation
53