Huawei NetEngine80E Installation Manual page 35

HUAWEI NetEngine80E Router
Installation Guide
----End
3.2.3 Assembling the Cord End Terminal and the Power Cable
This topic describes how to assemble a cord end terminal and a power cable.
Context
Figure 3-11
Figure 3-11 Components of a cord end terminal and a power cable
A. Cord end terminal
Procedure
Step 1 Based on the cross-sectional area of the cable conductor, strip a part of the insulation. The L1-
long conductor is exposed, as shown in
in Table
When you strip a power cable, do not damage the conductor of the cable.
Issue 02 (2011-09-10)
shows the components of a cord end terminal and a power cable.
B. Insulation layer of a power cable
3-3.
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 On-site Cable Assembly and Installation
C. Conductor of a power cable
Figure 3-12. The recommended values of L1 are listed
27