Huawei NetEngine80E Installation Manual page 102

Hide thumbs Also See for NetEngine80E:

HUAWEI NetEngine80E Router

Installation Guide

Table 5-3 Checklist for the installed cables inside the cabinet

No.

Signal Cables

Table 5-4

Table 5-4 Checklist for the installed signal cables

No.

Issue 02 (2011-09-10)

Check Item and Description

The cables are connected properly and

firmly.

The cable ties do not overlap. They are cut

smoothly and evenly at both ends without

any burr or sharp edge.

lists the items that need to be checked for the installed signal cables.

Check Item and Description

All the signal cables have passed the

continuity test before they are laid.

The signal cables are not laid over the

heat-dissipation mesh of the cabinet.

Adequate space is provided for the cables

at the turning points. The cables cannot

be compressed at the turning points.

The cables are straight and smooth. The

cables inside the cabinet are not crossed

and the cables outside the cabinet are

bundled.

Each signal cable is clearly labeled at both

ends. The labels face the same direction.

Huawei Proprietary and Confidential

5 Powering on Devices

Method

Check this according to the following

figure.

Ne80e