Huawei NetEngine80E Installation Manual page 139

Hide thumbs Also See for NetEngine80E:

HUAWEI NetEngine80E Router

Installation Guide

Figure D-1 Label for signal cables

To specify more clearly the position of a cable, use the dividing lines on the label. For example,

there is a dividing line between the cabinet number and the chassis number, and another one

between the chassis number and the slot number. The dividing line is 1.5 mm x 0.6 mm (0.06

in. x 0.02 in.) with the color of Pantone 656c (light blue).

The cut dotted line helps to fold the label when affixed to the cable, and its size is 1 mm x 2 mm

(0.04 in. x 0.08 in.).

There is a mark "TO:" (upside down in the figure) at the lower right corner of the label. The

mark is used to identify the opposite end of the cable on which the label is affixed.

Power Cable Label

The label for power cables should be attached to the identification plate on the cable ties that

are attached to the cable. The identification plate has an embossed area 0.2 mm x 0.6 mm (0.008

Issue 02 (2011-09-10)

Huawei Proprietary and Confidential

D Engineering Labels for Cables

131

Ne80e