Huawei NetEngine80E Installation Manual page 72

HUAWEI NetEngine80E Router
Installation Guide
Step 3 Hold the shell labeled "PUSH" and feed the male connector into the female connector until you
hear a clicking sound. The male and female connectors are securely installed, as shown in
3-77.
Figure 3-77 Installed MPO fiber connector
Step 4 To disassemble an MPO fiber connector, hold the shell labeled "PULL" and remove the male
connector, as shown in
Figure 3-78 Disassembling an MPO fiber connector
----End
3.5 Attaching Engineering Labels
Engineering labels are used for equipment installation and maintenance. The labels help to
ensure smooth installations and facilitate future maintenance.
Issue 02 (2011-09-10)
Figure 3-78.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 On-site Cable Assembly and Installation
Figure
64