Huawei NetEngine80E Installation Manual page 69

HUAWEI NetEngine80E Router
Installation Guide
Figure 3-70 Installed SC fiber connector
Step 4 Before you disassemble an SC fiber connector, unlock the male connector by removing it
slightly, as shown in
Figure 3-71 Disassembling an SC fiber connector
----End
Installing an MTRJ Fiber Connector
This section describes how to install an MTRJ fiber connector.
Procedure
Step 1 Remove the dustproof cap of the MTRJ fiber connector and store it for future use.
Step 2 Align the core pin of the male connector with that of the female connector, as shown in
3-72.
Issue 02 (2011-09-10)
Figure 3-71.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 On-site Cable Assembly and Installation
Figure
61