Huawei NetEngine80E Installation Manual page 38

HUAWEI NetEngine80E Router
Installation Guide
Cross-Sectional Area of Tubular
Terminal (mm
10 (0.015)
16 (0.025)
25 (0.039)
35 (0.054)
----End
3.3 Assembling Ethernet Cables
This topic describes how to assemble RJ45 connectors and Category 5 cable to make Ethernet
cables.
3.3.1 Assembling the Shielded RJ45 Connector and Ethernet Cable
This section describes how to assemble a shielded RJ45 connector and an Ethernet cable, or
specifically, a straight-through cable.
Context
Figure 3-15
Figure 3-15 Shielded RJ45 connector and cable
A. Jacket of connector
E. Jacket of Ethernet cable F. Shielding layer of Ethernet
Issue 02 (2011-09-10)
2 2
(in. ))
shows the components of an RJ45 connector and a shielded Ethernet cable.
B. Metal shell of connector
cable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 On-site Cable Assembly and Installation
Maximum Width of Crimped Terminal
W1 (mm(in.))
5.3 (0.21)
6 (0.24)
8.7 (0.34)
10 (0.39)
C. Wire holder of connector D. Plug of connector
G. Twisted-pair wires -
30