Huawei NetEngine80E Installation Manual page 25

Hide thumbs Also See for NetEngine80E:

HUAWEI NetEngine80E Router

Installation Guide

Figure 2-4 Unpacking the carton

1 Pressure-sensitive adhesive tape

4 Carton

7 Board box

Do not throw away a carton that still contains boards. It is recommended that one person unpacks

one carton. After unpacking a carton, check it carefully and make sure that it is empty before

unpacking the next carton.

----End

2.4 Checking the Boards

Clean the chassis and cabinet before installing the boards. Wear an antistatic wrist strap and

remove the board from the antistatic package. Check whether the board name is consistent with

the identifier on the package box, and whether any device is damaged or any component is

missing.

Check pins on the backplane of the chassis. The pins should be kept straight, orderly, and clean.

For the pins bent in the board slots on the backplane, repair them.

The boards are sensitive to Electrostatic Discharge (ESD). When handling boards, observe the

following rules:

Issue 02 (2011-09-10)

CAUTION

Check whether the device is securely grounded against requirements.

Wear an antistatic wrist strap during the installation.

Huawei Proprietary and Confidential

2 Preparing for the Installation

2 Packing strap

3 Carton label

5 Foam plate

6 Label of the board box

8 ESD bag

9 Board

Ne80e