Huawei NetEngine80E Installation Manual page 141

Hide thumbs Also See for NetEngine80E:

HUAWEI NetEngine80E Router

Installation Guide

The templates are made in Microsoft Word and the following requirements should be met:

Merging Cells in the Template

To merge two or more cells, do as follows:

Requirements on the Printer

To print the labels, a laser jet printer must be used, although there is no restriction on the model

of the printer. Before printing the label, set up the page and try printing.

The method of adjusting the page setup is as follows.

Issue 02 (2011-09-10)

Download the template from http://support.huawei.com.

Obtain the template from the Huawei local office.

When using the template, you can directly modify the contents of the template. The settings

of centered characters, direction, and fonts should not be changed.

When there are too many characters to be filled in, zoom out the characters, but make sure

that the printouts are clear and legible.

Select Edit/Select All.

Select Format/Borders and Shading/Borders. Select Box tab and click OK.

Drag the mouse to select cells to be merged and select the Table/Merge Cells.

Try printing on ordinary paper with both sides blank. Place the blank paper over the whole

page of label paper, and check whether the page setup conforms to the label layout.

Make sure the printer properties, such as "paper size" and "direction", have been set

correctly.

l If the printout conforms to the sheet of labels, print the labels on the label paper.

l If the printout does not conform, adjust the page setup and try printing again until the

correct printout is produced.

Select File/Page Setup.

Select Layout and set Header and Footer as 0.

Select the Margins tab page. Select Left for Gutter Position and adjust the values of Top,

Bottom, Left, and Right.

NOTE

If the warning prompt as shown in

printing.

Figure D-3 Warning prompt before printing

Huawei Proprietary and Confidential

Figure D-3

appears before printing, click Ignore to continue the

D Engineering Labels for Cables

133

Ne80e