Huawei NetEngine80E Installation Manual page 59

HUAWEI NetEngine80E Router
Installation Guide
Figure 3-55 Installed Ethernet connector
Step 4 To remove an Ethernet connector, press the locking key and pull out the connector, as shown in
Figure
Figure 3-56 Removing an Ethernet connector
----End
Installing an Unshielded Ethernet Connector
This section describes how to install an unshielded Ethernet connector.
Procedure
Step 1 Hold the male and female connectors, with the male connector facing the female connector, as
shown in
Issue 02 (2011-09-10)
3-56.
Figure 3-57.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 On-site Cable Assembly and Installation
51