Huawei NetEngine80E Installation Manual page 71

HUAWEI NetEngine80E Router
Installation Guide
Step 5 To disassemble an MTRJ fiber connector, press the locking key, as shown in
Figure 3-75 Disassembling an MTRJ fiber connector
----End
Installing an MPO Connector
This section describes how to install an MPO fiber connector.
Procedure
Step 1 Remove the dustproof cap of the MPO fiber connector and store it for future use.
Step 2 Align the core pin of the male connector with that of the female connector, as shown in
3-76.
Figure 3-76 Aligning the male connector with the female connector
Issue 02 (2011-09-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 On-site Cable Assembly and Installation
Figure 3-75.
Figure
63