Huawei NetEngine80E Installation Manual page 117

HUAWEI NetEngine80E Router
Installation Guide
The 10G XFP multi-mode optical transceiver supports two types of multi-mode optical fibers
with different cores.
and the transmission distance. During configuration, the length of optical fibers is restricted by
the transmission distance. In addition, the optical fiber with the 50-um core and 2000-MHz*km
modal/bandwidth is a special type, which is not delivered by Huawei. If this type of optical fibers
are required, you need to purchase it additionally.
Table A-21 The transmission distance of 10G XFP optical modules
Core Fiber(μm)
50
50
62.5
A.3.10 Interface Attributes of OC-3c/STM-1c ATM-SFP
Table A-22
Table A-22 Interface attributes of the OC-3c/STM-1c ATM-SFP
Attributes
Connector type
Interface attributes
Working mode
Link protocol
Network protocol
Table A-23 Attributes of 155M SFP optical modules
Attributes
Transmission
distance
Center
wavelength
Minimum
transmitting
power
Issue 02 (2011-09-10)
Table A-21 lists the relationship between the core, the modal/bandwidth,
Modal/Bandwidth
(Mhz*km)
2000
500
200
lists the interface attributes of the OC-3c/STM-1c ATM-SFP.
Description
LC/PC
Compliant with the selected SFP optical module. (For the attributes
of SFP modules, see
Full-duplex
IPoA
IP
Description
2 km ( 1.24 mi. ) 15 km ( 9.32
1310 nm
-19.0 dBm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table A-23.)
40 km ( 24.86
mi. ) mi. )
1310 nm 1310 nm
-15.0 dBm -5.0 dBm
A Parameters
Transmission distance
(km)
2 ~300 ( 1.24 ~ 186.42 )
2 ~82 ( 1.24 ~50.95 )
2 ~33 ( 1.24 ~ 20.51 )
80 km ( 49.71
mi. )
1550 nm
-5.0 dBm
109