Huawei NetEngine80E Installation Manual page 47

HUAWEI NetEngine80E Router
Installation Guide
Figure 3-33 Contact strips of the same height
Step 2 Hold an RJ45 connector and turn it 45°. Observe the top edges of the metal contact strips.
3-34
Figure 3-34 Unparallel contact strips of different heights
Step 3 Check whether the contact strips are clean. If they are not clean and the dirt cannot be removed,
replace it with a new RJ45 connector.
Figure 3-35 Dirt on a contract strip
Step 4 Check whether the contact strips and the plastic separators are well aligned and intact. If a
separator is skew and cannot be fixed, replace it with a new RJ45 connector.
an unqualified piece.
Issue 02 (2011-09-10)
shows an unqualified piece.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 On-site Cable Assembly and Installation
Figure 3-35 shows an unqualified piece.
Figure
Figure 3-36 shows
39