Huawei NetEngine80E Installation Manual page 50

HUAWEI NetEngine80E Router
Installation Guide
Procedure
Step 1 Feed both connectors of the cable into the ports of the cable tester.
Step 2 After the connectors are properly inserted, turn on the tester. If the indicators from 1 to G turn
on simultaneously, you can infer that the pins work normally and the wires are correctly
connected.
Figure 3-39 Testing the conduction and connections of wires
Step 3 Gently shake the connector and repeat
good contact with the core wires and Ethernet ports, as shown in
Figure 3-40 Checking the reliability
Issue 02 (2011-09-10)
NOTE
Turn the switch to the S position and check whether the indicators turn on simultaneously, as shown in
Figure 3-39.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 On-site Cable Assembly and Installation
Step 2 to check whether the metal contact strips are in
Figure 3-40.
42