Huawei NetEngine80E Installation Manual page 65

HUAWEI NetEngine80E Router
Installation Guide
Procedure
Step 1 Remove the dustproof cap of the FC connector and store it for future use.
Step 2 Align the core pin of the male connector with that of the female connector, as shown in
3-61.
Figure 3-61 Aligning the male connector with the female connector
Step 3 Feed the male connector into the female connector, as shown in
Figure 3-62 Feeding the male connector into the female connector
Step 4 Fasten the locking nut in the clockwise direction and ensure that the connector is securely
installed, as shown in
Issue 02 (2011-09-10)
Figure 3-63.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 On-site Cable Assembly and Installation
Figure 3-62.
Figure
57