Huawei NetEngine80E Installation Manual page 11

HUAWEI NetEngine80E Router
Installation Guide
Figure 1-2 NE80E components
1. LCD
3. Upper cable trough
5. Lower cable trough
7. Plastic panel of the power supply module
9. Rack-mounting ear
1.2 Cabinet Introduction
This section describes the cabinet.
The NE80E can be mounted in an N68E-22 cabinet or an International Electrotechnical
Commission (IEC) 19-inch standard cabinet. For the latter one, the depth should not be less than
800 mm ( 31.50 in. ), and its column should be at a distance of 100 mm ( 3.94 in. )away from
the front door. The N68E-22 interior is 46 U ( 2044.7 mm or 80.50 in. )high and its dimensions
are 600 mm x 800 mm x 2200 mm ( 23.62 in. x 31.50 in. x 86.61 in. ).
The outline of the N68E-22 cabinet is shown in
Issue 02 (2011-09-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2. Fan module
4. Board cage
6. Air intake frame
8. Power supply module
10. Handle
Figure 1-3.
1 Device Introduction
3