Agilent Technologies E5500A User Manual page 48

Using the Server Hardware Connections to Specify the Source
a. If a red circle with a slash appears, return to the Asset Manager
(click the Asset Manager button) and verify that the Agilent/HP
8663A is configured correctly.
b. Check your system hardware connections.
c. Click the green check-mark button on the asset manager's tool bar to
verify connectivity.
d. Return to "Server Hardware Connections" and click the Check I/O
button for a re-check.
4. Next proceed to one of the following absolute measurements using
either an Agilent/HP 8663A or an Agilent/HP 8644B source:
Testing the Agilent/HP 8663A Internal/External 10
page 5-10
Testing the Agilent/HP 8644B Internal/External 10
page 5-33
Agilent Technologies E5500 Phase Noise Measurement System 5-9
Expanding Your Measurement Experience
MHz,
MHz,