Table of Contents
Advertisement
Beginning the
Measurement
Making the
Measurement
Figure 14-3
Baseband Noise without using a Test Set Measurement Example
4. Choose the OK button. The appropriate measurement definition
parameters for this example have been pre-stored in this file.
page
14-4) lists the parameter data that has been entered for this
measurement example.) a Test Set Measurement
1. From the Measurement menu, choose New Measurement
2. When the Perform a New Calibration and Measurement dialog box
appears, click OK.
3. When the Connect Diagram appears on the computer's display, click on
the Continue button.
Connect Diagram for the Baseband using a Test Set Measurement
Agilent Technologies E5500 Phase Noise Measurement System 14-7
Baseband Noise Measurement Examples
(Table on
.
Advertisement
Table of Contents
