Table of Contents
Advertisement
Defining the
Measurement
NOTE
1. From the File menu, choose Open.
2. If necessary, choose the drive or directory where the file you want is
stored.
3. In the File Name box, choose "RFSynth_EFC.pnm".
4. Click the Open button.
The appropriate measurement definition parameters for this example
have been pre-stored in this file.
parameter data that has been entered for the RF Synthesizer using EFC
measurement example.)
Note that the source parameters entered for step 2 in
page 7-95
may not be appropriate for the reference source you are using. To
change these values, refer to
step "a". Otherwise, go to
Agilent Technologies E5500 Phase Noise Measurement System 7-73
Absolute Measurement Examples
RF Synthesizer using EFC
Table 7-16 on page 7-95
Table 7-14 on page
7-75, then continue with
"Beginning the Measurement" on page
lists the
Table 7-16 on
7-80:
Advertisement
Table of Contents
