Table of Contents
Advertisement
FM Discriminator Measurement Examples
FM Discriminator Measurement using Double-Sided Spur Calibration
c. Set the Know Spur Parameters Offset Frequency and Amplitude
for the spur you plan to use for calibration purposes.This calibration
method requires that you enter the offset and amplitude for a known
spur.
8. Choose the Block Diagram tab from the Define Measurement
window.
a. From the Reference Source pull-down, select Manual.
b. From the Phase Detector pull-down, select Automatic Detector
Selection.
11-8 Agilent Technologies E5500 Phase Noise Measurement System
Advertisement
Table of Contents
