Table of Contents
Advertisement
Defining the
Measurement
NOTE
Absolute Measurement Examples
Microwave Source
1. From the File menu, choose Open.
2. If necessary, choose the drive or directory where the file you want is
stored.
3. In the File Name box, choose "MicroSRC.pnm".
4. Click the Open button.
The appropriate measurement definition parameters for this example
have been pre-stored in this file.
parameter data that has been entered for the Microwave Source
measurement example.)
Note that the source parameters entered for step 2 in
page 7-114
may not be appropriate for the reference source you are using.
To change these values, refer to
with step "a". Otherwise, go to
page
7-103:
7-98 Agilent Technologies E5500 Phase Noise Measurement System
Table 7-20 on page 7-114
Table 7-20 on
Table 7-18 on page
7-100, then continue
"Beginning the Measurement" on
lists the
Advertisement
Table of Contents
